Contact Us
Wechat: 008618858107844
Whats app: 008618858107844
Skype: aaronzhangjiangfu
Address: Room A-312, NO. 6 Ju Yuan Road, Binjiang District, Zhejiang Province, China
Home > News > Content
Wireless Network Camera Installation Method _ Wireless Network Camera Setup Tutorial.
Apr 13, 2018

Wireless network camera installation method setup tutorial.

It is often possible to see people ask about the installation method and setup of wireless network camera on baidu. In fact, as long as you master the essentials, you can easily install it. Wireless webcams can be both home security and help you keep an eye on what's happening in your home, whenever it happens. The camera can connect to the wireless WIFE, and you can see the image of any place that the camera takes. If it's a wireless webcam, it's more flexible, and it can be placed where it can connect to the web.


So what about a camera with a wire or a wireless? Wireless versus wired connections are more flexible, and wired connections are easier to set up. But in real life, in the process of setting up a wireless connection, you first create a temporary wired connection. This is to prevent problems that can be returned to a wired connection when setting up a wireless connection. Now that wireless cameras are increasingly popular with younger users, we can consider using 802.11g or 802.11n networking technology rather than the old version of 802.11a or technology.

We assume that you have completed network Settings that support wired and wireless connections. Now, you only need a webcam and a network cable that can be connected to the router during setup. Home webcams cost around 300 to 1,000 yuan. In this installation also pay special attention to the following: Web camera features compatible with wireless protocol (i.e., 802.11 g or 802.11 n) enables you to use the wireless security (if you have, WEP or WPA) built-in Web server (without a computer connected to the Internet) to support audio and built-in microphone can be placed on the desktop or installed on the wall.

Collection of network information in addition to the equipment, in the process of setting, you need to know about the wireless network from the router's management interface information: the network name or service set identifier (SSID) network using the types of security such as WEP (wired equivalent protocol) or WPA (WiFi access) protective for WEP networks, with the key (length is 64 or 128 - bit) for WPA network, using encryption algorithm (TKIP or AES) sharing the encryption key or password.

Setup: network camera when everything is ready, you can start setting! The next step is to determine the location of the camera. Manufacturer general recommendation is to install Angle is good, the light intensity is good, on the placement of the cameras, unable to connect to router network cable, you need to you near the router, the camera and move it back.

Installation steps: connect the webcam to the router with the network cable, connect the power, and turn on the camera. Note here: the installation instructions will guide you how to connect or turn on the camera during setup to ensure that the following methods or other instructions from the manufacturer are used. You can use the user wizard to perform the operation process using the setup software of the computer that starts the camera in the same network as the webcam. Note: if you are prompted to enter the administrator user name and password during setup, make sure to select a strong password to ensure the security of the camera in the network. The wireless network information input value setting software. If the interface prompts you to choose "Infrastructure" or "ad-hoc" mode, select Infrastructure.

During setup, you get the IP address of the camera. Write down the address so that you can access the camera later and have a memorable name for the camera. After completing the setup wizard, turn off the camera, disconnect the router, and test the camera. The long-awaited moment is coming. Start the camera when the camera is not plugged in.